Carb Calculator App?

Discussion in 'Feline Health - (Welcome & Main Forum)' started by Mandy S, Aug 6, 2020.

Thread Status:
Not open for further replies.
  1. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020
    I downloaded an App that someone posted on the fb page called Carb Calc. Does anyone use it? It asks for ash % but most of the things I'm seeing don't have that listed.

    I've put in a few foods and I get this message with varying negative numbers depending on the food.

    I thought if this worked well I could have my husband download it and use it at the store when he's picking up cat food after work while we figure out what she will eat. The Petsmart is a block away from him so it's convenient.
     

    Attached Files:

    jt and trouble (GA) likes this.
  2. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    Hi Mandy, my understanding is that the 'carb calc' calculator only calculates the carb content of a food as dry matter content. (So, it imagines that all the water is removed from the food, and the protein, fat, carbs, etc are evaluated by percentages of weight).
    But here we use a slightly different method to calculate carb content; we compare by the 'percentage of calories' that come from carbs, and this is more accurate than just looking at the dry matter by weight.
    There is a list of US foods compiled by Dr Lisa Pierson (where she's very kindly done lots of calculations), which I'll post the link to below.

    There is also an online calculator that can be used to calculate the percentage of calories from carbs, but....the difficult thing with US foods is actually getting the right data to do the calculation with... US pet food labels only give very general 'maximum or minimum' values for protein, fat, etc, but they don't tell us what is currently in the food (this is one of the reasons we can get wonky calculation results...) ...To get the current data it's usually necessary to contact the manufacturer and ask for it. Very occasionally, especially with the more premium (pricey!) foods the data may be on the manufacturer's website.

    Here is the link to Dr Pierson's food list:
    https://catinfo.org/docs/CatFoodProteinFatCarbPhosphorusChart.pdf

    And if you can get the current data for a food you're interested in you can use this online calculator to work out the percentage of cals from carbs:
    https://secure.balanceit.com/tools/_gaconverter/index.php?

    Eliz
     
    jt and trouble (GA) likes this.
  3. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020
    Thank you, I'm glad I asked. :)

    I looked on the food list, but some of the foods I want to try aren't listed...I think they've come out since that list was made maybe? Idk. I have to pick stuff with just one protein and some of those aren't listed.
    I'll try that calculator.
     
    jt and trouble (GA) likes this.
  4. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020
    What do you put in the calculator if you don't know ash content?
     
    jt and trouble (GA) likes this.
  5. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020
    jt and trouble (GA) likes this.
  6. jt and trouble (GA)

    jt and trouble (GA) Well-Known Member

    Joined:
    Dec 28, 2009
    @Elizabeth and Bertie
    If you are asking Elizabeth its best to tag her OR click the reply button under her last post.
    My brain just froze over at all this calculating stuff. :oops::p:(
     
    Elizabeth and Bertie likes this.
  7. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    Hi Mandy, that page just gives the 'guaranteed analysis' of possible min/max values for protein, fat, etc. But if you scroll down down the page in the link below you will see a section where the food data is shown as 'As Fed Percentage'. That is the info that you need (and it also lists ash content.) I used the calculator I linked to further up the thread and the food comes out as around 5.14% calories from carbs.
    https://weruva.com/nutrition-landing/bff-play-ni/

    .
     
  8. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    Mine frequently does the same, dear Jeanne! Haha! :bighug:
     
    jt and trouble (GA) likes this.
  9. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    Well..... ....I think the creator of the 'carb calc' calculator suggests 2.5% if there is no figure for ash. That's not a bad figure, but this is of course just a general estimate, and the actual figure may be different, so maybe just bear that in mind when doing a calculation... (A similar situation arises calculating carb content of some dry foods where no moisture content is listed. In that case an 'average' moisture % suggested just for the purpose of the calculation is 10%. But...it could be as low as 6% or as high as maybe 12%. So, sometimes I do different calculations using a number of possible moisture percentages, to see how that changes things... :rolleyes:)

    Just as an illustration of how ash values can vary you can take a quick look at the 'ash' column on the food list that I maintain for UK foods. If you scan across to the far right of this chart, the penultimate column is the ash content in the cat food. If you scroll down that you'll see that ash content is 'often' in the low 2's. But can vary from around 0.7 to 5....
    https://docs.google.com/spreadsheets/d/1J5JpMe6TDXrHq_aTl9hUtHy6Gs9oRBqlz4nPGKxtySA/pubhtml
     
    jt and trouble (GA) likes this.
  10. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020
    Thank you! I didn't even see that there was a different chart below that one. :/
    I'm also glad that the food is okay for her to eat because she really likes it and hasn't eaten this well in 3 months.
     
    jt and trouble (GA) likes this.
  11. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020

    I understand what you're saying at a base level. lol I need to practice and hopefully will get a better grasp on this as we go along.
     
    jt and trouble (GA) likes this.
  12. Critter Mom

    Critter Mom Well-Known Member

    Joined:
    Jun 16, 2014
    Is there any % figure for 'inorganic matter' or similar on the food label, Mandy? IIRC some manufacturers use that on their labels instead of 'crude ash'.


    Mogs
    .
     
  13. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020
    No, it has ash, I was just looking at the wrong place. But I'll remember that when reading other food labels. I like that Weruva has so much info on their site.
     
  14. jt and trouble (GA)

    jt and trouble (GA) Well-Known Member

    Joined:
    Dec 28, 2009
    I do too! Good company
     
  15. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020
    Okay, I'm confused, and I'm so sorry. :/

    There is a post on the fb page talking about calculating carbs and they are saying to NOT use the "as fed" numbers. Honestly half the stuff on their makes my head spin.
     
    jt and trouble (GA) likes this.
  16. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    Hi Mandy, there is quite a bit of conflicting info at times on the FB page (Feline Diabetes FB group). :confused: ...But the way that carbs are calculated there 'should' be exactly the same as it is here... The 'Feline Diabetes' page is the FB presence of FDMB, and so 'should' give the same info. But, because it's FB....well....that's not always the case.... I see people post all kinds of stuff about carb content; some good, some bad, and some just confusing. And I often try to ease the confusion (but it's like trying to hold back the tide....)
    The policy of both groups is to compare by the 'percentage of calories from carbs'. This is the most useful way of comparing carb values. But there are other ways of comparing carb values. Some people compare by the percentage of carbs by weight, (wet or dry); some compare by calories from carbs per 100g or ounce, etc...

    A complicating factor in calculating carb values of US foods is that the data is usually given as a 'guaranteed analysis', but unfortunately that just shows the range of minimum and maximum values for protein, fat, moisture, etc. It doesn't tell us what is 'actually' in the product. And if we want to calculate the percentage of cals from carbs then we do need to know - as near as is possible - the current values. This may be given as 'as fed' data. Data given as 'typical analysis' is also fine (this is how the data is usually given in Europe). It doesn't matter if the data is given as wet or dry matter values because water has no calories. Once we know how much of that food is comprised of protein, fat, and carbs (the sources of calories), we can then work out the total calories of the food, and the percentage of calories that come from protein, fat, and carbs.

    BTW, lots of people get confused about carb values, even people who've been dealing with feline diabetes for years... It's a topic that does just confuse people, endlessly. And it can totally fry your brain if you let it... Been there, haha! :rolleyes:

    Eliz
     
    Last edited: Aug 16, 2020
    jt and trouble (GA) likes this.
  17. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    ...Regarding 'dry matter' or 'wet matter' when calculating the percentage of calories from carbs, maybe this helps to explain why it doesn't matter which you start out with...

    Let's say I'm feeding a dry kibble food that has 30% of calories from carbs. If I crush it up and add water to that, and smoosh it around a bit and make it into a sort of pate texture, it still has 30% of calories coming from carbs, because the only thing that's changed is that I've added water to a dry food that has 30% cals from carbs. The water has no calories so adding it doesn't affect the calorific distribution that comes from protein, fat, and carbs.

    Conversely, let's assume that I have a wet food that is 4% calories from carbs. I spread that in a baking tray and dry it out in the oven, and then I break it up into little cat treats (don't even try to imagine the smell, I did actually try this once... :eek:) Those treats still have 4% calories from carbs, because all I've done is take the water out of a food that has 4% calories from carbs. The water has no calories so removing it doesn't affect the calorific distribution...

    So, you can use wet or dry matter data to do carb calculations with.
    If using wet matter for a calculation the moisture/water element will be removed early on as part of the calculation anyway, because we only need to deal with the parts of the food that have calories; protein, fat, and carbs. So, whether starting out with wet or dry matter, we'll actually be using the same ratio of protein, fat, and carbs, to do the calculation with; the distribution of those elements will be the same...

    I hope this makes sense. But do tell me if it doesn't!
     
    Last edited: Aug 16, 2020
    jt and trouble (GA) likes this.
  18. Critter Mom

    Critter Mom Well-Known Member

    Joined:
    Jun 16, 2014
    I do worry if a post-Brexit US-UK trade deal goes ahead that, in addition to changes for human food, labelling regulations for pet foods will become more aligned with those currently used in the US. Changes to UK food labelling standards is a biggie for the US trade negotiators (it's in the United States' published objectives for an FTA).


    Mogs
    .
     
  19. jt and trouble (GA)

    jt and trouble (GA) Well-Known Member

    Joined:
    Dec 28, 2009
    Well said
     
    Elizabeth and Bertie likes this.
  20. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    I totally hear you, Mogs... ....:(....
     
  21. Mandy S

    Mandy S Member

    Joined:
    Jul 29, 2020

    What you're saying about the water content not changing things makes sense. :) So when I'm looking at a food, I can put the dry matter info into the caclculator?

    um...I can imagine the smell of baking cat food. yuck. lol
     
    jt and trouble (GA) likes this.
  22. Maddie Mouse

    Maddie Mouse Member

    Joined:
    Jul 31, 2020
    I don't know if anyone here has used it, but I found this useful-looking calculator by Googling:

    http://fnae.org/carbcalorie.html

    If you put in all the numbers, you get calories per 100g for each nutrient and total calories per 100g, so you just divide the carbs figure by the total.

    Note: for dry food, I added up the given percentages and assumed the remainder (around 10%) was water.
     
  23. Elizabeth and Bertie

    Elizabeth and Bertie Well-Known Member

    Joined:
    Sep 6, 2010
    Sorry for late reply... Yes! You can do that, as long as the dry matter isn't shown as 'guaranteed analysis'. You can just enter '0' in the moisture box.
     
    jt and trouble (GA) likes this.
Thread Status:
Not open for further replies.

Share This Page