6/4 Screechy AMPS 281; +2,262; +6, 218;+9,328
- Thread starter mtdenise
- Start date
- Status
I hope I'm doing all this correctly. I wasn't sure if I should start a new condo with his PM numbers or just add them here. My subject line won't accept anymore characters. I'm new to all this so please let me know if there's a better way to do things.
PMPS 335 - I'm going to try to get a +4 reading tonight if I can stay awake. Unfortunately that puts the test at 12:45 a.m. and I'm usually in bed by 10:30.
This is his third cycle on 1.25 units. I think for Screechy his numbers were good today. Hoping this trend keeps up. I'll ask for advice after his sixth cycle, unless you all see something here that needs adjusting sooner. I'm so thankful for this board and guidance. :smile:
PMPS 335 - I'm going to try to get a +4 reading tonight if I can stay awake. Unfortunately that puts the test at 12:45 a.m. and I'm usually in bed by 10:30.
This is his third cycle on 1.25 units. I think for Screechy his numbers were good today. Hoping this trend keeps up. I'll ask for advice after his sixth cycle, unless you all see something here that needs adjusting sooner. I'm so thankful for this board and guidance. :smile:
rhiannon and shadow (GA)
Member Since 2012
Evening...
it's generally one condo a day... am and pm cycle goes in it.
When you have several tests, you can just delete a few to make room for the pmps number and later tests.....
If you get a real low number, you might want to keep it in the viewing.
I often would do the amps cycle.... and then just revise it to the pm cycle at the pm time.... and just do the pm numbers.
You can see what others are doing.
Most just set an alarm clock to get those random evening tests....
helps if you put it where you have to get up to turn it off.... so you don't just roll back over...
especially when you are checking for those lows.
it's generally one condo a day... am and pm cycle goes in it.
When you have several tests, you can just delete a few to make room for the pmps number and later tests.....
If you get a real low number, you might want to keep it in the viewing.
I often would do the amps cycle.... and then just revise it to the pm cycle at the pm time.... and just do the pm numbers.
You can see what others are doing.
Most just set an alarm clock to get those random evening tests....
helps if you put it where you have to get up to turn it off.... so you don't just roll back over...
especially when you are checking for those lows.
- Status