3D Printed Dosage Helpers

[Elohelay]

Hello!

I was complaining to my husband that I wanted to find/make something to help me get an accurate dose because (I feel like) 0.25u is so difficult to keep consistent, even with half unit marks. I was searching 3d print plans and found one that made me very excited to try, and then I saw that it had been posted here! Increasing Dosing Accuracy Using 3D Printer Molds

Here is my question: Can I use any of those files with these syringes, or am I still going to have to come up with something on my own?

From the thingiverse link, the creator says it can be used with:

• BD Micro-Fine+ 0,5ml U40 8mm - EAN: 0382904876036
• BD Micro-Fine+ Demi 0,3ml U100 8mm 30G - EAN: 0382904826031
• BD Ultra-Fine 0,3ml U100 12,7mm 29G - EAN: 0382903261031 (Added by Tony B)
• Braun Omnican 20 0,5ml U40 8mm - EAN: 4039239541936
• Sol-Vet U100 0,3ml 30G x 1/2" (0.3mm x 12,5mm) - GTIN: 0818392013016
• Sol-Vet U40 0,3ml 30G x 1/2" (0.3mm x 12,5mm) - REF: V3305-40 GTIN: 818392012682
• Insumed U100 0,3ml 31G x 8mm - Rev. 01/2019 REF: 02 022725 030 150 - EAN: 08058090005322

I'm thinking the answer is no, but I'm cautiously optimistic.

 

[Wendy&Neko]

Different syringe brands have wider or narrower barrels, meaning the distance between lines on the syringes also varies as a result. Thus you would have different sizes for your printers. Did you take a look at the Dosing with Calipers post linked in the post you found on using 3D Printer models? More of the US syringe brands, including the one you use, are listed in that post.