07/22 Mowgli AMPS 326 PMPS 250 Questions on Calipers

AmandaE

AmandaE

Member Since 2019
07/21 Condo

Mowgli had a cute little reduction today! I hope this will complete his curve flattening process and hopefully we will see somewhat of a decrease in morning bounces.

Historically 0.75u hasn’t been enough for Mowgli... if this dose doesn’t work out this time I’m going to try a 1/8u increase to 0.88 using MY NEW CALIPERS!!

@Ti-Mousse! I’m ready for you to pass the conversion sheet to me! I want to try and give Mowgli’s PM dose with the calipers :)

Hope everyone has had a great weekend and is ready to get back to the ol’ grind :D
 
carfurby said:
Good luck with the new dose and the calipers. Once you get used to them you'll love them.
Click to expand...
Thanks Carla! I was bragging earlier this month about my amazing eyesight, but I think even I might need to grab some craft glasses :P

What do you use for being able to see with them?
 
good going -- I may need more magnification to use calipers, than my current stack of two 3x reading glasses ...
hoping your reduction works well
 
Hoping Mowgs can clear this bounce quick for you! I'm having trouble seeing the tiny dose of 0.1U with the calipers, so I think I might consider either getting some magnifiers or changing to a different syringe. If I do end up upping back to 0.25U I think it would be a lot more successful trying to line it up.

The cold brew machine at work is out, so I'm stuck with boring coffee maker coffee :blackeye::coffee: Have a great day Amanda!
 
images
 
I couldn't manage without calipers at all...the lines on the syringes are completely unreliable...and the smaller the dose, the more you need the accuracy of calipers :) SO glad you like them Amanda!
 
Armish & Roo said:
Hoping Mowgs can clear this bounce quick for you! I'm having trouble seeing the tiny dose of 0.1U with the calipers, so I think I might consider either getting some magnifiers or changing to a different syringe. If I do end up upping back to 0.25U I think it would be a lot more successful trying to line it up.

The cold brew machine at work is out, so I'm stuck with boring coffee maker coffee :blackeye::coffee: Have a great day Amanda!
Click to expand...
Why doesnt everyone understand our caffeine requirements!! I will send you my caffeine IV to borrow ;)

Thanks for the wishes for Mowg to clear his bounce! he's bouncing daily on 1u, I hope he will chill on 0.75u
 
Ok! So I went to use the calipers tonight and I chickened out because:

A. I think these calipers might be too big to use the inside of the lower calipers,
B. outside edges of the upper calipers are just overlapped for the dosage I need.
C. I was unsure where exactly to line up the calipers on the syringe... is it just below the plastic lip where the syringe transitions from needle area to the reservoir?
D. I was unsure if I should measure the current dose I am giving Mowgli to see if it is closer to 1u or 0.75u

I have read the info article on this.. I use the Canadian BD ultra fine. Tips or advice welcome :)
 
AmandaE said:
Ok! So I went to use the calipers tonight and I chickened out because:

A. I think these calipers might be too big to use the inside of the lower calipers,
B. outside edges of the upper calipers are just overlapped for the dosage I need.
C. I was unsure where exactly to line up the calipers on the syringe... is it just below the plastic lip where the syringe transitions from needle area to the reservoir?
D. I was unsure if I should measure the current dose I am giving Mowgli to see if it is closer to 1u or 0.75u

I have read the info article on this.. I use the Canadian BD ultra fine. Tips or advice welcome :)
Click to expand...
A. B. With our type of syringes, we have to use the outside edges of the small arms to measure the dose.
C. Upper arm lined up with the plastic ring around the top of the syringes ; I ignore the zero line, like Carla!
D. The point is to have consistent dosages from now on.

I PM you SS this morning!

If you're not sure, let me know I'll take a picture of one of my dosed syringe!
In a couple of days, you'll be showing everybody how to use them! :p
 
Ti-Mousse said:
A. B. With our type of syringes, we have to use the outside edges of the small arms to measure the dose.
C. Upper arm lined up with the plastic ring around the top of the syringes ; I ignore the zero line, like Carla!
D. The point is to have consistent dosages from now on.

I PM you SS this morning!

If you're not sure, let me know I'll take a picture of one of my dosed syringe!
In a couple of days, you'll be showing everybody how to use them! :p
Click to expand...
It would be great if you could post a photo of your syringe/caliper set up, if you don't mind. Please tag me if you do. I have been using calipers but I think using the small arms would be better and I'm not sure how to do that. Thanks!
 
AmandaE said:
Ok! So I went to use the calipers tonight and I chickened out because:

A. I think these calipers might be too big to use the inside of the lower calipers,
B. outside edges of the upper calipers are just overlapped for the dosage I need.
C. I was unsure where exactly to line up the calipers on the syringe... is it just below the plastic lip where the syringe transitions from needle area to the reservoir?
D. I was unsure if I should measure the current dose I am giving Mowgli to see if it is closer to 1u or 0.75u

I have read the info article on this.. I use the Canadian BD ultra fine. Tips or advice welcome :)
Click to expand...

We were using the lower (closer to the needle) end of the zero line on the US BD ultra fines when we were fine dosing.
 
Ti-Mousse said:
If you're not sure, let me know I'll take a picture of one of my dosed syringe!
In a couple of days, you'll be showing everybody how to use them! :p
Click to expand...
I might need this! The smaller calipers are overlapped so I found it kind of confusing!! I’ll post a pic when I create my condo today :)
 
You must log in or register to reply here.
Back
Top