Lisa & Leo
Member Since 2012
These are the instructions to change the time to "fall back 1 hour" on ReLion Confirm monitors. These specific instructions will move the time BACK 1 hour.
- Start with meter OFF.
- Press BOTH buttons on the side for about 7 seconds until the meter turns on. Yes, the buttons can be hard to press. Keep pressing. It will turn on and say "SET" (for Settings)
- Hit the TOP button FIVE times. You will see the "hours" digit flashing on the bottom of the screen.
- Hit the BOTTOM button 23 times (it will only go forward in time, not backward, so you have to go all the way around the clock.)
- Hit the TOP button 4 times. The meter will show "End" and turn off automatically.
Now you are done. Check to make sure the time is correct.
Note: values will ONLY be changed if you hit the BOTTOM button. So if you get "lost" just keep hitting the TOP button and it will eventually take you to END and turn off. If you hit the BOTTOM button at any time and change something you didn't mean to, you need to hit TOP until the unit turns off, then start over.
Generic instructions to change any value.
- Press BOTH buttons to turn meter on to SET (settings)
- Hit the TOP button until you get to the number you want to change, then hit the BOTTOM button to change the number, then hit the TOP button until the meter turns off.
If you need help, please post or PM me.
- Start with meter OFF.
- Press BOTH buttons on the side for about 7 seconds until the meter turns on. Yes, the buttons can be hard to press. Keep pressing. It will turn on and say "SET" (for Settings)
- Hit the TOP button FIVE times. You will see the "hours" digit flashing on the bottom of the screen.
- Hit the BOTTOM button 23 times (it will only go forward in time, not backward, so you have to go all the way around the clock.)
- Hit the TOP button 4 times. The meter will show "End" and turn off automatically.
Now you are done. Check to make sure the time is correct.
Note: values will ONLY be changed if you hit the BOTTOM button. So if you get "lost" just keep hitting the TOP button and it will eventually take you to END and turn off. If you hit the BOTTOM button at any time and change something you didn't mean to, you need to hit TOP until the unit turns off, then start over.
Generic instructions to change any value.
- Press BOTH buttons to turn meter on to SET (settings)
- Hit the TOP button until you get to the number you want to change, then hit the BOTTOM button to change the number, then hit the TOP button until the meter turns off.
If you need help, please post or PM me.
